Residential · Mesa, AZ
Flake epoxy flooring gives concrete a clean, slip-resistant, easy-to-maintain finish that holds up in busy garages, shops, and commercial spaces. Elite Epoxy Mesa has served Mesa since 2015, installing and repairing full-flake systems built for hot tires, chemicals, and daily wear.
Prep decides whether a flake floor lasts, so we start with a real concrete assessment: moisture vapor, old sealer, curing compounds, oil contamination, spalling, and cracks. We mechanically profile the slab with diamond grinding or shot blasting (not acid etching), then HEPA-vacuum the dust and detail the edges. Cracks and pitting get routed and filled with epoxy crack filler or polyurea, and we address divots with an epoxy mortar patch before we lay a uniform pigmented epoxy base coat at the right thickness for full broadcast.
Mesa-area slabs see high heat, big temperature swings, and plenty of dust, so we plan the system around real site conditions and cure windows. After the base coat, we broadcast vinyl color flakes to rejection for a true full-flake look, scrape and vacuum the excess, then apply a clear grout coat so the surface builds tight and cleans easily. The wear layer is typically a UV-stable polyaspartic or polyurethane topcoat, chosen for gloss level, chemical resistance, and cure time. For traction, we can add aluminum oxide or polymer grit in the topcoat to meet slip-resistance needs in garages, entries, and back-of-house areas.
Customers in Mesa choose us because we install flake epoxy flooring like a coating system, not a paint job. You get clear scope, written prep steps, and product selection that matches how the space is used, whether it is hot-tire pickup risk in a garage, pallet traffic in a warehouse, or frequent cleaning in a breakroom. Crews show up with commercial grinders, proper crack repair materials, and moisture mitigation options when testing calls for it. We also schedule around access needs and provide realistic cure and return-to-service times so your routine is not guesswork.
On install day we walk the slab with you, protect walls and door thresholds, and confirm details like cove base, stem walls, step faces, control joints, and floor drains. When the coating is complete, we do a final inspection for coverage, flake density, consistent texture, and clean terminations at edges, then review care and cleaning using pH-neutral products and soft bristle tools. You receive a written estimate up front, a documented system description (base coat, flake broadcast, grout coat, topcoat), and simple guidance on when to park, move equipment back in, and resume washing. If you are calling for repair, we’ll explain what can be blended and what requires a full recoat so expectations are set before work starts.
Yes. We provide a free written estimate after an on-site evaluation of the slab, prep requirements, and the coating system that fits your use.
Sometimes, but it depends on bond, thickness, and contamination. We typically diamond grind to a sound layer, remove loose material, and then recoat with the appropriate primer and build coat.
High-gloss clears can be slick with water. We can add traction media (fine polymer grit or aluminum oxide) and adjust texture to improve slip resistance without making the floor hard to clean.
For sun exposure, we commonly use UV-stable polyaspartic or aliphatic polyurethane topcoats. This helps reduce yellowing compared with epoxy-only topcoats.
Yes. We install resinous flooring for commercial and light industrial spaces and can phase work by bay or zone to reduce downtime while maintaining proper cure times.
Flake epoxy flooring is a broadcast coating system that upgrades plain concrete into a durable, decorative surface for garages, man caves, workshops, retail back rooms, and light industrial spaces. It combines a pigmented epoxy base coat with vinyl color flakes, then a clear grout coat and a protective topcoat to create a dense, easy-clean floor. Elite Epoxy Mesa installs new full-flake floors and repairs failed coatings, peeling edges, hot-tire pickup, and worn topcoats with a process built around mechanical prep and the right chemistry for the job.
A quality flake epoxy flooring system starts with concrete profiling to the correct surface texture and cleanliness, then controlling variables that cause delamination like moisture vapor, oil saturation, and weak concrete at the surface. We use mechanical grinding or shot blasting, HEPA dust control, and targeted repairs so the base coat can wet out evenly and lock into the pores of the slab. From there, we broadcast flakes heavily for the look and thickness you expect, then scrape and vacuum to remove loose material before building a smooth, sealed surface with a clear grout coat.
Finish selection matters in Arizona sun and heat. Many customers choose a UV-stable polyaspartic topcoat for abrasion resistance and color stability, while others prefer polyurethane for toughness and chemical resistance in work areas. We can dial in gloss from satin to high gloss and add traction media where needed, especially on steps, sloped garage entries, or areas that see water. If your existing floor is peeling, chalking, or stained, repairs often involve grinding back failures, re-establishing the profile, then re-broadcasting and topcoating for a uniform appearance.
If you are comparing bids, ask exactly how the slab will be prepped, what crack repair products will be used, whether flakes are partial or full broadcast, and what the final wear layer is. Our estimates spell out the coating layers and the return-to-service schedule so you know what you are getting before work begins. For flake epoxy flooring in Mesa, schedule a site visit and we will recommend the right system for your concrete and how you use the space.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Mesa. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
