Residential · Mesa, AZ
When an old coating peels, bubbles, or stays tacky, a new topcoat will not fix it, you need proper epoxy removal down to a sound base. Elite Epoxy Mesa has served Mesa since 2015, grinding and recoating garage floors, warehouses, kitchens, and retail slabs with durable, chemical-resistant systems.
Prep starts with identifying what is on your slab, epoxy, polyaspartic, urethane cement, acrylic sealer, or failed paint, then testing for moisture and mapping weak areas. We protect walls and door tracks, pull base trim as needed, and mechanically remove the coating with walk-behind diamond grinders (typically 16-30 grit for bulk removal, then 60-120 grit to profile). Cracks and spalls get chased, cleaned, and repaired with fast-set epoxy mortar or polyurea joint filler, then the slab is vacuumed with HEPA dust extraction so the next system bonds to clean, open concrete.
In Mesa, heat, dust, and hot-tire pickup are common failure drivers, so we select a system that matches the space and schedule. After epoxy removal, we build the floor from the bottom up, moisture-mitigating epoxy primer when needed, 100 percent solids epoxy basecoat, optional full-broadcast vinyl flake or quartz, then a UV-stable polyaspartic or aliphatic urethane topcoat for abrasion and stain resistance. We tune slip resistance with aluminum oxide or polymer grit, and we control cure windows and recoat times so you get consistent gloss, color, and film build without fisheyes or roller marks.
Mesa customers choose us because we do the hard part right, removal and surface profile, not just a quick scuff. You get a licensed and insured epoxy contractor that uses mechanical prep instead of chemical stripping, documents the plan, and keeps the job site clean with dust-controlled grinding. Our crews understand vapor drive, joint movement, and edge detailing, so the coating looks finished at stem walls, control joints, and around drains and steps, not just in the middle of the slab.
Before we leave, we walk the floor with you and verify coverage, texture, and transitions, then review cure times for foot traffic, vehicles, and equipment. You receive a free written estimate up front, the product system we installed (primer, base, broadcast, topcoat), and care instructions for cleaning, de-greasing, and spill response. If your slab needs more than a recoat, we will explain options like moisture mitigation, urethane cement resurfacing, or a grind and seal so you can choose the right floor for your use and budget.
Yes. We provide a free written estimate after an on-site evaluation of the slab, prep requirements, and the coating system that fits your use.
Sometimes, but it depends on bond, thickness, and contamination. We typically diamond grind to a sound layer, remove loose material, and then recoat with the appropriate primer and build coat.
High-gloss clears can be slick with water. We can add traction media (fine polymer grit or aluminum oxide) and adjust texture to improve slip resistance without making the floor hard to clean.
For sun exposure, we commonly use UV-stable polyaspartic or aliphatic polyurethane topcoats. This helps reduce yellowing compared with epoxy-only topcoats.
Yes. We install resinous flooring for commercial and light industrial spaces and can phase work by bay or zone to reduce downtime while maintaining proper cure times.
Epoxy removal is the step most contractors skip, and it is the reason many recoats fail. If your floor is peeling, flaking, delaminating, or showing hot-tire pickup, the fix is to remove the weak coating, repair the concrete, and rebuild the system to match your use, garage parking, forklift traffic, commercial kitchens, or chemical exposure. Elite Epoxy Mesa handles epoxy floor coating removal and recoating for homeowners and businesses across Mesa with dust-controlled grinding and proven resin systems.
Successful recoating starts with knowing what failed. Old coatings can shear off because the slab was sealed, contaminated with oil, or never profiled to the right concrete surface profile (CSP). We remove coatings with industrial grinders and the correct diamond tooling, then edge-grind with hand tools where machines cannot reach. After removal, we address joints and cracks with epoxy or polyurea fillers and skim as needed for a uniform substrate.
Next, we install the right build for your environment. A 100 percent solids epoxy base can be paired with a full flake broadcast for garages and showrooms, or a quartz broadcast for higher traction areas. For faster return to service and better UV stability, we often finish with polyaspartic or aliphatic urethane topcoats. Where moisture vapor transmission is high, we can add a moisture-mitigating epoxy primer so the system stays bonded.
If you are comparing bids for epoxy removal in Mesa, ask how the contractor will profile the slab, manage dust, repair defects, and specify the primer and topcoat by product type, not just “epoxy.” We will inspect your floor, explain the removal approach, and provide a free written estimate with clear options and timelines.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Mesa. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
